Section 2: Lockout/Tag-out Equipment Guidelines

Lockout/Tag-out Guidelines

2.12 Lockout/Tag-out shall be as follows:

2.12.1 In situations where the Owner’s equipment must have Lockout/Tag-out to ensure the safety of the Constructor’s personnel, the Lockout/Tag-out shall be performed in accordance with established Iowa Occupational Health and Safety (IOSA) regulations and University of Iowa procedures.

2.12.2 The Lockout/Tag-out of any equipment shall be coordinated with the effected maintenance personnel.

2.12.3 The Constructor shall not remove any University of Iowa Lockout/Tag-out devices.